Home › Vehicle Interior › METER / GAUGE / DISPLAY › COMBINATION METER
RM30B0U _58 Vehicle Interior _009872 METER / GAUGE / DISPLAY _0054283 COMBINATION METER A

METER / GAUGE / DISPLAY  COMBINATION METER  INSTALLATION  


PROCEDURE

Hide 1.INSTALL COMBINATION METER ASSEMBLY

a.

Connect the 2 connectors.


b.

Attach the 2 clips to install the combination meter assembly.


c.

Install the 2 screws.


Hide 2.INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL

Hide 3.INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

Hide 4.INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL

Hide 5.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION