Home › Vehicle Interior › METER / GAUGE / DISPLAY › CLOCK
RM30B0U _58 Vehicle Interior _009872 METER / GAUGE / DISPLAY _0054284 CLOCK A

METER / GAUGE / DISPLAY  CLOCK  INSTALLATION  


PROCEDURE

Hide 1.INSTALL TELLTALE LIGHT ASSEMBLY

a.

Connect the connector.


b.

Attach the claw and 2 clips to install the telltale light assembly.


Hide 2.INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL

Hide 3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION