1.REMOVE GLOVE COMPARTMENT DOOR STOPPER SUB-ASSEMBLY
Detach the clip and remove the glove compartment door stopper sub-assembly.
2.REMOVE NO. 2 SWITCH HOLE BASE
Detach the 3 clips and claw and remove the No. 2 switch hole base.
3.REMOVE SPARE SWITCH HOLE COVER
except AWD:
Detach the 2 claws and remove the spare switch hole cover.
w/o Power Back Door:
Detach the 2 claws and remove the spare switch hole cover.
Detach the 2 claws and remove the spare switch hole cover.
w/o Power Back Door:
Detach the 2 claws and remove the spare switch hole cover.
4.REMOVE DIFFERENTIAL LOCK SWITCH (for AWD)
5.REMOVE DOOR CONTROL SWITCH ASSEMBLY (w/ Power Back Door)
6.REMOVE POWER BACK DOOR MAIN SWITCH (w/ Power Back Door)
7.REMOVE NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY (w/ Smart Entry and Start System)
8.REMOVE ANTENNA CORD SUB-ASSEMBLY