1.INSTALL ANTENNA CORD SUB-ASSEMBLY
2.INSTALL NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY (w/ Smart Entry and Start System)
3.INSTALL POWER BACK DOOR MAIN SWITCH (w/ Power Back Door)
4.INSTALL DOOR CONTROL SWITCH ASSEMBLY (w/ Power Back Door)
5.INSTALL DIFFERENTIAL LOCK SWITCH (for AWD)
6.INSTALL SPARE SWITCH HOLE COVER
Use the same procedure for all the spare switch hole covers.
Attach the 2 claws to install the spare switch hole cover.
7.INSTALL NO. 2 SWITCH HOLE BASE
Attach the claw and 3 clips to install the No. 2 switch hole base.
8.INSTALL GLOVE COMPARTMENT DOOR STOPPER SUB-ASSEMBLY
Attach the clip to install the glove compartment door stopper sub-assembly.