1.REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)
2.REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (for Driver Side)
3.REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)
Using a moulding remover, detach the 6 claws, 2 clips and 2 guides and remove the power window regulator switch assembly with front door armrest base panel.
Using a moulding remover, disconnect the connectors.
4.REMOVE DOOR CONTROL SWITCH (for Front Passenger Side)
Using a moulding remover, detach the 2 claws and remove the door control switch.