Home › Vehicle Interior › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY
RM30B0U _58 Vehicle Interior _009991 SEAT BELT _0054790 FRONT SEAT INNER BELT ASSEMBLY A

SEAT BELT  FRONT SEAT INNER BELT ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 1.INSTALL FRONT SEAT INNER BELT ASSEMBLY LH

a.
B334882
0.792,2.896 1,3.167 1,3.167 1.667,3.167 true 1.708,3.083 2.021,3.281 0.313,0.198 10 *1
*1 Protruding Part


Install the front seat inner belt assembly LH with the nut.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Do not allow the anchor of the front seat inner belt assembly LH to overlap the protruding part of the separate type front seat cushion spring assembly.



b.
B334879

Return the separate type front seat cushion cover to its original position.


c.

Connect each connector and each clamp.


Hide 2.INSTALL FRONT SEAT INNER BELT ASSEMBLY RH

a.
B339090
1.906,2.031 2.427,2.031 2.427,2.031 2.688,1.552 true 1.708,1.969 2.021,2.125 0.313,0.156 10 *1
*1 Protruding Part


Install the front seat inner belt assembly RH with the nut.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Do not allow the anchor of the front seat inner belt assembly RH to overlap the protruding part of the separate type front seat cushion spring assembly.



b.

Attach the guide to install the limit switch of the front seat inner belt assembly RH.


c.

Install the screw.


d.
B339088

Return the separate type front seat cushion cover to its original position.


e.

Connect each connector and each clamp.


f.

Attach the 2 guides and 2 claws to install the front set inner cushion shield RH.