Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(for Radio Receiver Type)
RM30B0U _56 Audio / Visual / Telematics _009403 AUDIO / VIDEO _0054848 AUDIO AND VISUAL SYSTEM(for Radio Receiver Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio Receiver Type)  CD Sound Skips  


PROCEDURE

1.CHECK CD
a.
I100152

Check that the CD is not deformed or cracked.


Result:
Proceed to
No deformation or cracks on the CD
Deformation or cracks on the CD



No deformation or cracks on the CD

2.CHECK CD

Deformation or cracks on the CD

END (CD IS DEFECTIVE)

2.CHECK CD
a.
I100151

Check the CD.

NOTICE:

Do not use a conventional record cleaner or anti-static preservative.


HINT:

If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.



Result:
Proceed to
The CD is clean
The CD is not clean



The CD is clean

3.CHECK CD

The CD is not clean

CLEAN CD

3.CHECK CD
a.

Replace the CD with a known good one and recheck that the malfunction disappears.


Result:
Proceed to
Malfunction disappears
Malfunction appears



Malfunction disappears

END (CD IS DEFECTIVE)

Malfunction appears

4.CHECK RADIO RECEIVER ASSEMBLY
4.CHECK RADIO RECEIVER ASSEMBLY
a.

Check the radio receiver assembly installation condition.

i.

Check that the radio receiver assembly is properly installed.



Result:
Proceed to
Radio receiver assembly is properly installed
Radio receiver assembly is not properly installed



Radio receiver assembly is properly installed

REPLACE RADIO RECEIVER ASSEMBLY

Radio receiver assembly is not properly installed

REINSTALL RADIO RECEIVER ASSEMBLY PROPERLY