Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(for Radio and Display Type) › 2012.12–2013.11
RM30B0U _56 Audio / Visual / Telematics _009403 AUDIO / VIDEO _0054849 AUDIO AND VISUAL SYSTEM(for Radio and Display Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type)  Panel Switches do not Function  


CAUTION / NOTICE / HINT

NOTICE:

After replacing the radio and display receiver assembly of vehicles subscribed to pay-type satellite radio broadcasts, XM radio ID registration is necessary (w/ SDARS System).


PROCEDURE

1.CHECK PANEL SWITCH
a.

Check for foreign matter around the switches that might prevent operation.


Result:
Proceed to
No foreign matter is found
Foreign matter is found



No foreign matter is found

2.CHECK PANEL SWITCH (OPERATION CHECK)

Foreign matter is found

REMOVE ANY FOREIGN MATTER FOUND

2.CHECK PANEL SWITCH (OPERATION CHECK)
a.
E225786

Enter the "Panel&Steering Switch Check Mode" screen. Refer to Check Panel&Steering Switch in Operation Check.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM(for Radio and Display Type)>OPERATION CHECK


b.

Operate the abnormal switch and check if the switch status is correctly displayed.


Result:
Proceed to
The switch status is correctly displayed as operated
The switch status is not correctly displayed as operated



The switch status is correctly displayed as operated

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

The switch status is not correctly displayed as operated