Home › Vehicle Exterior › WIPER / WASHER › REAR WIPER MOTOR
RM30B0U _59 Vehicle Exterior _010075 WIPER / WASHER _0054884 REAR WIPER MOTOR A

WIPER / WASHER  REAR WIPER MOTOR  REMOVAL  


PROCEDURE

Hide 1.REMOVE BACK DOOR CENTER GARNISH

Hide 2.REMOVE BACK DOOR SIDE GARNISH LH

Hide 3.REMOVE BACK DOOR SIDE GARNISH RH

Hide 4.REMOVE BACK DOOR TRIM BOARD ASSEMBLY

Hide 5.REMOVE REAR WIPER ARM COVER

a.
E268342
0.792,0.99 1.25,1.188 0.458,0.198 10 (A) 2.365,0.135 2.823,0.333 0.458,0.198 10 (B)

Detach the 2 claws (A) and open the rear wiper arm cover as shown in the illustration.


b.

Detach the 2 claws (B) and remove the rear wiper arm cover.


Hide 6.REMOVE REAR WIPER ARM AND BLADE ASSEMBLY

a.
E268343

Remove the nut and the rear wiper arm and blade assembly.


Hide 7.REMOVE NO. 1 REAR WIPER LINK PIVOT WASHER

a.
E268344

Remove the No. 1 rear wiper link pivot washer.


Hide 8.REMOVE REAR WIPER MOTOR ASSEMBLY

a.
E268345

Disconnect the connector.


b.

Remove the 3 bolts and rear wiper motor assembly.