Home › Vehicle Exterior › WIPER / WASHER › WASHER MOTOR
RM30B0U _59 Vehicle Exterior _010075 WIPER / WASHER _0054888 WASHER MOTOR A

WIPER / WASHER  WASHER MOTOR  INSTALLATION  


PROCEDURE

Hide 1.INSTALL HEADLIGHT CLEANER CONTROL RELAY

E268378

a.

Attach the claw to install the headlight cleaner control relay.


Hide 2.INSTALL HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY

E268379

a.

Install the headlight cleaner motor and pump.


Hide 3.INSTALL WINDSHIELD WASHER JAR ASSEMBLY

a.

Attach the guide to install the windshield washer jar and pump assembly with the 3 bolts.

Torque:
5.0 N*m (51 kgf*cm, 44 in.*lbf)

E268374


b.

Attach the 6 clamps and connect the 2 connectors.


Hide 4.INSTALL WASHER INLET SUB-ASSEMBLY

a.
E268381

Install the washer inlet to the windshield washer jar and pump assembly.


b.

Install the clip.


Hide 5.INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY

a.
E268382

Install the windshield washer motor and pump assembly to the packing of the windshield washer jar assembly.


b.

Connect the connector.


Hide 6.FILL UP WINDSHIELD WASHER JAR AND PUMP ASSEMBLY WITH WASHER FLUID

E268383

a.

Connect the 2 washer hoses to the windshield washer motor and pump, and fill the washer jar with washer fluid.


Hide 7.INSTALL FRONT FENDER LINER RH

E268384

a.

Install the front fender liner RH with the 6 clips.