Home › Vehicle Interior › HEATING / AIR CONDITIONING › FRONT BLOWER MOTOR
RM30B0U _58 Vehicle Interior _009988 HEATING / AIR CONDITIONING _0054979 FRONT BLOWER MOTOR A

HEATING / AIR CONDITIONING  FRONT BLOWER MOTOR  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:

A bolt without a torque specification is shown in the standard bolt chart.

Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS


PROCEDURE

Hide 1.INSTALL BLOWER WITH FAN MOTOR SUB-ASSEMBLY

a.

Install the blower motor with fan sub-assembly with the 3 screws.


b.

Connect the connector.


c.

Connect the connector bracket with the screw.


Hide 2.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY