A bolt without a torque specification is shown in the standard bolt chart Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS.
1.INSTALL COOLER (ROOM TEMPERATURE SENSOR) THERMISTOR
Connect the connector and aspirator pipe to the cooler (room temperature sensor) thermistor.
Attach the 2 claws to install the cooler (room temperature sensor) thermistor.
2.INSTALL NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY
3.INSTALL AIR CONDITIONING CONTROL ASSEMBLY
4.INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL
5.INSTALL RADIO RECEIVER ASSEMBLY
6.INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY
7.INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY
8.INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL