1.REMOVE CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL
2.REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY
3.REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY
4.REMOVE RADIO RECEIVER ASSEMBLY
5.REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL
6.REMOVE AIR CONDITIONING CONTROL ASSEMBLY
7.REMOVE NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY
8.REMOVE COOLER (ROOM TEMPERATURE SENSOR) THERMISTOR
Detach the 2 claws and disconnect the cooler (room temperature sensor) thermistor from the instrument panel.
Pull out the cooler (room temperature sensor) thermistor and disconnect the connector and aspirator pipe to remove the cooler (room temperature sensor) thermistor.