A bolt without a torque specification is shown in the standard bolt chart.
Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS
1.INSTALL AIR CONDITIONING PANEL ASSEMBLY
Attach the 2 claws to connect the No. 2 heater control cable sub-assembly to the air conditioning panel assembly.
Attach the 2 claws to connect the air mix damper control cable sub-assembly to the air conditioning panel assembly.
Connect the connector.
Attach the 2 hooks and 2 claws to install the air conditioning panel assembly.
2.INSTALL RADIO RECEIVER ASSEMBLY
3.INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY
4.INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY
5.INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL