1.REMOVE CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL
2.REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY
3.REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY
4.REMOVE RADIO RECEIVER ASSEMBLY
5.REMOVE AIR CONDITIONING PANEL ASSEMBLY
Detach the 2 clips and 2 hooks.
Disconnect the connector.
Detach the 2 claws and disconnect the airmix damper control cable sub-assembly.
Detach the 2 claws, disconnect the No. 2 heater control cable sub-assembly and then remove the air conditioning panel assembly.