Be sure to follow the correct removal and installation procedures of the front seat airbag sub-assembly RH.
1.INSPECT FRONT SEAT AIRBAG SUB-ASSEMBLY RH (for Vehicle not Involved in Collision)
Perform a diagnostic system check.
Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DTC CHECK / CLEAR
Visually check for defects with the front seat airbag sub-assembly RH installed on the vehicle.
The defects are as follows:
Cuts on the front seat cushion assembly around the front seat airbag sub-assembly RH
Small cracks on the front seat cushion assembly around the front seat airbag sub-assembly RH
Significant discoloration on the front seat cushion assembly around the front seat airbag sub-assembly RH
No defects are found.
If any of the defects is found, replace the separate type front seat cushion cover or separate type front seat cushion pad with a new one.
2.INSPECT FRONT SEAT AIRBAG SUB-ASSEMBLY RH (for Vehicle Involved in Collision and Airbag not Deployed)
Perform a diagnostic system check.
Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DTC CHECK / CLEAR
Visually check for defects with the front seat airbag sub-assembly RH removed from the vehicle.
The defects are as follows:
Make sure that there are no scratches, broken or frayed threads on the surface of the base fabric of the front seat airbag sub-assembly RH
Marks from being dropped
Deformation on the installation part of the front seat airbag sub-assembly RH
Cracks or other damage to the wire harness or connector
No defects are found.
If any of the defects is found, replace the front seat airbag sub-assembly RH with a new one.