Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › FRONT SEAT SIDE AIRBAG ASSEMBLY(for Manual Seat)
RM30B0U _58 Vehicle Interior _010074 SUPPLEMENTAL RESTRAINT SYSTEMS _0055015 FRONT SEAT SIDE AIRBAG ASSEMBLY(for Manual Seat) G

SUPPLEMENTAL RESTRAINT SYSTEMS  FRONT SEAT SIDE AIRBAG ASSEMBLY(for Manual Seat)  ON-VEHICLE INSPECTION  


CAUTION / NOTICE / HINT

CAUTION:

Be sure to follow the correct removal and installation procedures of the front seat airbag assemblies.


PROCEDURE

Hide 1.INSPECT FRONT SEAT AIRBAG ASSEMBLY (for Vehicle not Involved in Collision)


b.

Visually check for defects with the front seat airbag assemblies installed on the vehicle.

i.

The defects are as follows:

·

Cuts on the front seatback assembly around the front seat airbag assemblies

·

Small cracks on the front seatback assembly around the front seat airbag assemblies

·

Significant discoloration on the front seatback assembly around the front seat airbag assemblies


OK:

No defects are found.


HINT:

If any of the defects is found, replace the separate type front seatback cover or separate type front seatback pad with a new one.




Hide 2.INSPECT FRONT SEAT AIRBAG ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)


b.

Visually check for defects with the front seat airbag assemblies removed from the vehicle.

i.

The defects are as follows:

·

Make sure that there are no scratches, broken or frayed threads on the surface of the base fabric of the front seat airbag assemblies

·

Marks from being dropped

·

Deformation on the installation part of the front seat airbag assemblies

·

Cracks or other damage to the wire harness or connector


OK:

No defects are found.


HINT:

If any of the defects is found, replace the front seat airbag assembly with a new one.