Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › FRONT AIRBAG SENSOR
RM30B0U _58 Vehicle Interior _010074 SUPPLEMENTAL RESTRAINT SYSTEMS _0055018 FRONT AIRBAG SENSOR G

SUPPLEMENTAL RESTRAINT SYSTEMS  FRONT AIRBAG SENSOR  ON-VEHICLE INSPECTION  


CAUTION / NOTICE / HINT

CAUTION:

Be sure to follow the correct removal and installation procedures of the front airbag sensors.


PROCEDURE

Hide 1.INSPECT FRONT AIRBAG SENSOR (for Vehicle not Involved in Collision)

Hide 2.INSPECT FRONT AIRBAG SENSOR (Vehicle Involved in Collision and Airbag not Deployed)


b.

Visually check the front airbag sensors for defects if the front bumper of the vehicle or the area around the bumper is damaged.

i.

The defects are as follows:

·

Cracks on the sensor housing

·

Dents on the sensor housing

·

Chips on the sensor housing

·

Cracks or other damage to the connector

·

Damage to the serial number


OK:

No defects are found.


HINT:

If any of the defects is found, replace the front airbag sensor with a new one.




Hide 3.INSPECT FRONT AIRBAG SENSOR (Vehicle Involved in Collision and Airbag is Deployed)

a.

When airbags have deployed as the result of a collision, be sure to replace all front airbag sensors in the damaged areas (anywhere in need of repair).


b.

Visually check the front airbag sensors in undamaged areas for defects.

i.

The defects are as follows:

·

Cracks on the sensor housing

·

Dents on the sensor housing

·

Chips on the sensor housing

·

Cracks or other damage to the connector

·

Damage to the serial number


OK:

No defects are found.


HINT:

If any of the defects is found or a front airbag sensor has detected a major collision, replace the front airbag sensor with a new one.