Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(for Radio and Display Type) › 2012.12–2013.11
RM30B0U _56 Audio / Visual / Telematics _009403 AUDIO / VIDEO _0054849 AUDIO AND VISUAL SYSTEM(for Radio and Display Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type)  Satellite Radio Broadcast cannot be Selected or After Selecting Broadcast, Broadcast cannot be Added into Memory  


CAUTION / NOTICE / HINT

NOTICE:
·

Some satellite radio broadcasts require payment. A contract must be made between a satellite radio company and the user. If the contract expires, the broadcast will not be able to be listened to or viewed.

·

After replacing the radio and display receiver assembly of vehicles subscribed to pay-type satellite radio broadcasts, XM radio ID registration is necessary.



PROCEDURE

1.CHECK RADIO & DISPLAY RECEIVER ASSEMBLY
a.

Check radio condition.


Result:
Proceed to
Broadcast cannot be selected
Broadcast can be selected, but selection cannot be memorized



Broadcast cannot be selected

ADD PRESET CHANNEL INTO MEMORY AGAIN

Broadcast can be selected, but selection cannot be memorized

2.CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY
2.CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY
a.

Check the number of preset channels.


Result:
Proceed to
18 channels have already been preset
0 to 17 channels have been preset



18 channels have already been preset

END (ONLY 18 CHANNELS CAN BE PRESET)

0 to 17 channels have been preset

3.CHECK BATTERY
3.CHECK BATTERY
a.

Check if the battery was replaced.


Result:
Result
Battery was not replaced
Battery was replaced



Battery was not replaced

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

Battery was replaced

4.ADD PRESET CHANNEL INTO MEMORY AGAIN
4.ADD PRESET CHANNEL INTO MEMORY AGAIN
a.

Check if the preset channels that have been cleared can be added into memory again.


Result:
Result
Preset channels can be added into memory
Preset channels cannot be added into memory



Preset channels can be added into memory

END (PRESET CHANNELS WAS NOT MEMORIZED)

Preset channels cannot be added into memory