Home › Vehicle Interior › LIGHTING (INT) › BACK DOOR COURTESY SWITCH
RM30B0U _58 Vehicle Interior _010070 LIGHTING (INT) _0057956 BACK DOOR COURTESY SWITCH A

LIGHTING (INT)  BACK DOOR COURTESY SWITCH  INSTALLATION  


PROCEDURE

Hide 1.INSTALL BACK DOOR LOCK ASSEMBLY (BACK DOOR COURTESY SWITCH)

a.

w/ Power Back Door:

i.

Apply MP grease to the sliding parts of the back door lock assembly (back door courtesy switch).


ii.

Attach the clamp to install the back door lock assembly (back door courtesy switch).


iii.

Install the 4 bolts.

Torque:
7.0 N*m (71 kgf*cm, 62 in.*lbf)


iv.

Connect the connector.



b.

w/o Power Back Door:

i.

Apply MP grease to the sliding parts of the back door lock assembly (back door courtesy switch).


ii.

Install the back door lock assembly (back door courtesy switch) with the 3 bolts.

Torque:
7.0 N*m (71 kgf*cm, 62 in.*lbf)


iii.

Connect the connector.



Hide 2.INSTALL BACK DOOR TRIM BOARD ASSEMBLY

Hide 3.INSTALL BACK DOOR SIDE GARNISH LH

Hide 4.INSTALL BACK DOOR SIDE GARNISH RH

Hide 5.INSTALL CENTER BACK DOOR GARNISH