Home › Drivetrain › GF1A TRANSFER / 4WD / AWD › DYNAMIC TORQUE CONTROL AWD SYSTEM
RM30B0U _52 Drivetrain _009983 GF1A TRANSFER / 4WD / AWD _0058072 DYNAMIC TORQUE CONTROL AWD SYSTEM C

GF1A TRANSFER / 4WD / AWD  DYNAMIC TORQUE CONTROL AWD SYSTEM  C1280/82  Engine Circuit Malfunction  


DESCRIPTION

If a malfunction in the ECM circuit occurs, the 4WD ECU assembly will output this DTC.

DTC No. Detection Item DTC Detection Condition Trouble Area
C1280/82 Engine Circuit Malfunction When the following continues for 5 seconds or more:
·

Communication with engine control ECM is operating normally, but engine control system is malfunctioning.


·

Engine control system

·

4WD ECU assembly



CAUTION / NOTICE / HINT

HINT:

Check the condition of each related circuit connector before troubleshooting.

Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>ELECTRONIC CIRCUIT INSPECTION PROCEDURE


PROCEDURE

1.CHECK FOR DTC (ENGINE CONTROL SYSTEM)
a.

Check if the engine control system DTC is output.

Click hereEngine / Hybrid System>2AR-FE ENGINE CONTROL>SFI SYSTEM>DTC CHECK / CLEAR

Powertrain > Engine > Trouble Codes
50001 61
Result:
Proceed to
Engine control system DTC is not output
Engine control system DTC is output




Engine control system DTC is not output

Engine control system DTC is output

GO TO ENGINE CONTROL SYSTEM (DIAGNOSTIC TROUBLE CODE CHART)