Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › CLEARANCE SONAR MAIN SWITCH
RM30B0U _56 Audio / Visual / Telematics _009404 PARK ASSIST / MONITORING _0058391 CLEARANCE SONAR MAIN SWITCH A

PARK ASSIST / MONITORING  CLEARANCE SONAR MAIN SWITCH  INSTALLATION  


PROCEDURE

Hide 1.INSTALL TELLTALE LIGHT ASSEMBLY (CLEARANCE SONAR MAIN SWITCH)

a.

Connect the connector.


b.

Attach the claw and 2 clips to install the telltale light assembly (clearance sonar main switch).


Hide 2.INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL

Hide 3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION