Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › BLIND SPOT MONITOR SENSOR
RM30B0U _56 Audio / Visual / Telematics _009404 PARK ASSIST / MONITORING _0058392 BLIND SPOT MONITOR SENSOR A

PARK ASSIST / MONITORING  BLIND SPOT MONITOR SENSOR  REMOVAL  


PROCEDURE

Hide 1.REMOVE QUARTER PANEL MUDGUARD REAR LH (w/ Mudguard)

Hide 2.REMOVE QUARTER PANEL MUDGUARD REAR RH (w/ Mudguard)

Hide 4.REMOVE BLIND SPOT MONITOR SENSOR LH

NOTICE:
·

Avoid any impact to the blind spot monitor sensor LH.

·

Do not drop the blind spot monitor sensor LH. If it is dropped, replace it with a new one.



a.
B335780

Disconnect the connector.


b.

Remove the 3 nuts and blind spot monitor sensor LH.


Hide 5.REMOVE BLIND SPOT MONITOR SENSOR RH

NOTICE:
·

Avoid any impact to the blind spot monitor sensor RH.

·

Do not drop the blind spot monitor sensor RH. If it is dropped, replace it with a new one.



a.
B335781

Disconnect the connector.


b.

Remove the 3 nuts and blind spot monitor sensor RH.