Home › Drivetrain › U760E AUTOMATIC TRANSMISSION / TRANSAXLE › TRANSMISSION WIRE
RM30B0U _52 Drivetrain _010989 U760E AUTOMATIC TRANSMISSION / TRANSAXLE _0058561 TRANSMISSION WIRE A

U760E AUTOMATIC TRANSMISSION / TRANSAXLE  TRANSMISSION WIRE  INSTALLATION  


PROCEDURE

Hide 1.INSTALL TRANSMISSION WIRE

a.

Install the transmission wire onto the transmission valve body assembly with the bolt and lock plate.

Torque:
10.8 N*m (110 kgf*cm, 8 ft.*lbf)


b.

Coat the temperature sensor with ATF.


c.

Connect the temperature sensor onto the transmission valve body assembly with the bolt and lock plate.

Torque:
10.8 N*m (110 kgf*cm, 8 ft.*lbf)


d.

Engage the clamp and connect the transmission wire.


e.

Connect the 7 connectors of the shift solenoid valve.


f.

Connect the connector of the transmission revolution sensor.