Home › Drivetrain › U760E AUTOMATIC TRANSMISSION / TRANSAXLE › TRANSMISSION CONTROL CABLE
RM30B0U _52 Drivetrain _010989 U760E AUTOMATIC TRANSMISSION / TRANSAXLE _0058567 TRANSMISSION CONTROL CABLE A

U760E AUTOMATIC TRANSMISSION / TRANSAXLE  TRANSMISSION CONTROL CABLE  REMOVAL  


PROCEDURE

Hide 1.REMOVE AIR CLEANER CAP SUB-ASSEMBLY

Hide 2.REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

Hide 3.REMOVE AIR CLEANER CASE SUB-ASSEMBLY

Hide 5.REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY

a.

Move the shift lever to N.


b.
C203403

Disconnect the end of the transmission control cable assembly from the shift lever assembly.


c.
C127813
1.823,0.656 2.146,0.135 2.146,0.135 2.24,0.135 true 1.385,1.406 1.219,1.74 1.219,1.74 1.094,1.74 true 0.938,1.667 1.104,1.833 0.167,0.167 10 *2 2.281,0.042 2.833,0.229 0.552,0.188 10 *1
*1 Stopper
*2 Nut


Pull out the stopper of the transmission control cable assembly.


d.

Rotate the nut of the transmission control cable assembly counterclockwise approximately 180° and, while holding the nut in that position, disconnect the transmission control cable assembly from the shift lever assembly.

NOTICE:

Do not over-rotate the nut as it will come off the internal spring and the transmission control cable assembly will not be reusable.



e.
C207570

Remove the nut and disconnect the transmission control cable assembly from the control shaft lever.


f.

Remove the clip and disconnect the transmission control cable assembly from the control cable bracket.


g.
C127837

Remove the 2 bolts and disconnect the transmission control cable assembly.


h.

Pull out the transmission control cable assembly to remove it.