1.REMOVE REAR CONSOLE BOX SUB-ASSEMBLY
2.REMOVE NO. 2 CONSOLE BOX MOUNTING BRACKET
Remove the 4 bolts and No. 2 console box mounting bracket.
3.REMOVE PARKING BRAKE LEVER SUB-ASSEMBLY
Disconnect the parking brake switch connector.
| *1 | Lock Nut |
| *2 | No. 1 Cable Adjusting Nut |
Remove the lock nut and No. 1 cable adjusting nut.
Disconnect the No. 1 parking brake cable assembly from the parking brake equalizer.
Remove the 2 bolts and parking brake lever (with the No. 1 parking brake cable).
4.DISCONNECT NO. 1 PARKING BRAKE CABLE ASSEMBLY
Pull up the parking brake lever claw.
Disconnect the No. 1 parking brake cable assembly from the parking brake lever.
5.REMOVE PARKING BRAKE SWITCH ASSEMBLY