Home › Vehicle Interior › SEAT › SEAT HEATER SYSTEM
RM30B0U _58 Vehicle Interior _009409 SEAT _0061197 SEAT HEATER SYSTEM D

SEAT  SEAT HEATER SYSTEM  OPERATION CHECK  


CHECK THERMOSTAT (LH Side)


a.
E271047
0.229,0.417 0.542,0.615 0.313,0.198 10 *A 0.271,2.573 0.583,2.771 0.313,0.198 10 *B
*A for Manual Seat
*B for Power Seat


Check the thermostat in the front seat cushion heater assembly LH.

i.

Remove the front seat cushion heater assembly LH.

for Manual Seat (Click hereVehicle Interior>SEAT>FRONT SEAT CUSHION HEATER(for Front Passenger Side)>REMOVAL)

for Power Seat (Click hereVehicle Interior>SEAT>FRONT SEAT CUSHION HEATER(for Front Passenger Side)>REMOVAL)


ii.

Remove the front seatback heater assembly LH.

for Manual Seat (Click hereVehicle Interior>SEAT>FRONT SEATBACK HEATER(for Front Passenger Side)>REMOVAL)

for Power Seat (Click hereVehicle Interior>SEAT>FRONT SEATBACK HEATER(for Front Passenger Side)>REMOVAL)


iii.

Reconnect the connector of the front seat cushion heater assembly LH and the connector of the front seatback heater assembly LH.


iv.

Apply battery voltage and check operation of the front seat heater as shown in the table below.

OK:
for Manual Seat
Connection Specified Condition
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2
Front seat heater temperature 42°C (107.6°F)


for Power Seat
Connection Specified Condition
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2
Front seat heater temperature 42°C (107.6°F)

NOTICE:

Immediately after confirming that the seat heater is functioning normally, remove the battery leads. Failing to do so may cause the seat heater to overheat.





CHECK THERMOSTAT (RH Side)


a.
E271047
0.229,0.417 0.542,0.615 0.313,0.198 10 *A 0.271,2.573 0.583,2.771 0.313,0.198 10 *B
*A for Manual Seat
*B for Power Seat


Check the thermostat in the front seat cushion heater assembly RH.

i.

Remove the front seat cushion heater assembly RH.

for Manual Seat (Click hereVehicle Interior>SEAT>FRONT SEATBACK HEATER(for Front Passenger Side)>REMOVAL)

for Power Seat (Click hereVehicle Interior>SEAT>FRONT SEAT CUSHION HEATER(for Front Passenger Side)>REMOVAL)


ii.

Remove the front seatback heater assembly RH.

for Manual Seat (Click hereVehicle Interior>SEAT>FRONT SEATBACK HEATER(for Front Passenger Side)>REMOVAL)

for Power Seat (Click hereVehicle Interior>SEAT>FRONT SEATBACK HEATER(for Front Passenger Side)>REMOVAL)


iii.

Reconnect the connector of the front seat cushion heater assembly RH and the connector of the front seatback heater assembly RH.


iv.

Apply battery voltage and check operation of the front seat heater as shown in the table below.

OK:
for Manual Seat
Connection Specified Condition
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2
Front seat heater temperature 42°C (107.6°F)


for Power Seat
Connection Specified Condition
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2
Front seat heater temperature 42°C (107.6°F)

NOTICE:

Immediately after confirming that the seat heater is functioning normally, remove the battery leads. Failing to do so may cause the seat heater to overheat.