1.REMOVE BACK DOOR CENTER GARNISH
2.REMOVE BACK DOOR SIDE GARNISH LH
3.REMOVE BACK DOOR SIDE GARNISH RH
Use the same procedure described for the LH side.
4.REMOVE BACK DOOR TRIM BOARD ASSEMBLY
5.REMOVE POWER BACK DOOR SENSOR ASSEMBLY LH
Disconnect the connector.
Remove the 4 screws.
Detach the 3 clips and remove the power back door sensor assembly LH.
6.REMOVE POWER BACK DOOR SENSOR ASSEMBLY RH
Use the same procedure described for the LH side.