Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › SEAT POSITION SENSOR
RM30B0U _58 Vehicle Interior _010074 SUPPLEMENTAL RESTRAINT SYSTEMS _0054973 SEAT POSITION SENSOR G

SUPPLEMENTAL RESTRAINT SYSTEMS  SEAT POSITION SENSOR  ON-VEHICLE INSPECTION  


CAUTION / NOTICE / HINT

CAUTION:

Be sure to follow the correct removal and installation procedures of the seat position airbag sensor.


PROCEDURE

Hide 1.INSPECT SEAT POSITION AIRBAG SENSOR (for Vehicle not Involved in Collision)

Hide 2.INSPECT SEAT POSITION AIRBAG SENSOR (for Vehicle Involved in Collision and Airbag not Deployed)


b.

Visually check for defects with the seat position airbag sensor installed on the vehicle.

i.

The defects are as follows:

·

Cracks on the sensor housing

·

Dents on the sensor housing

·

Chips on the sensor housing

·

Cracks or other damage to the connector

·

Peeling of the label


OK:

No defects are found.


HINT:

If any of the defects is found, replace the seat position airbag sensor with a new one.