Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › OCCUPANT CLASSIFICATION ECU
RM30B0U _58 Vehicle Interior _010074 SUPPLEMENTAL RESTRAINT SYSTEMS _0054974 OCCUPANT CLASSIFICATION ECU G

SUPPLEMENTAL RESTRAINT SYSTEMS  OCCUPANT CLASSIFICATION ECU  ON-VEHICLE INSPECTION  


CAUTION / NOTICE / HINT

CAUTION:

Be sure to follow the correct removal and installation procedures of the occupant classification ECU.


PROCEDURE

Hide 1.INSPECT OCCUPANT DETECTION ECU (for Vehicle not Involved in Collision)

Hide 2.INSPECT OCCUPANT DETECTION ECU (Vehicle Involved in Collision and Airbag not Deployed)


b.

Visually check for defects with the occupant classification ECU installed on the vehicle.

i.

The defects are as follows:

·

Cracks on the ECU housing

·

Dents on the ECU housing

·

Chips on the ECU housing

·

Cracks or other damage to the connector

·

Damage to the serial number


OK:

No defects are found.


HINT:

If any of the defects is found, replace the occupant classification ECU with a new one.




Hide 3.INSPECT OCCUPANT DETECTION ECU (for Vehicle Involved in Collision and Airbag is Deployed)


b.

Visually check for defects with the occupant classification ECU installed on the vehicle.

i.

The defects are as follows:

·

Cracks on the ECU housing

·

Dents on the ECU housing

·

Chips on the ECU housing

·

Cracks or other damage to the connector

·

Damage to the serial number

OK:

No defects are found.



HINT:

If any of the defects is found, replace the occupant classification ECU with a new one.