Home › Engine / Hybrid System › 2AD-FHV LUBRICATION › OIL LEVEL SENSOR
RM3090E _51 Engine / Hybrid System _008384 2AD-FHV LUBRICATION _0046778 OIL LEVEL SENSOR A

2AD-FHV LUBRICATION  OIL LEVEL SENSOR  INSTALLATION  


PROCEDURE

Hide 89491 1.INSTALL ENGINE OIL LEVEL SENSOR

a.

Install the engine oil level sensor with the 4 bolts.

Torque:
7.0 N*m (71 kgf*cm, 62 in.*lbf)


b.

Connect the engine oil level sensor connector.


Hide 51441 5.INSTALL NO. 1 ENGINE UNDER COVER