12204
1.INSTALL PCV VALVE SUB-ASSEMBLY
Apply adhesive to 2 or 3 threads of the PCV valve sub-assembly.
Toyota genuine adhesive 1324, three bond 1324 or equivalent
Using a 22 mm ball joint lock nut wrench, install the PCV valve sub-assembly.
Use the formula to calculate special torque values for situations where ball joint lock nut wrench is combined with a torque wrench.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
Connect the PCV hose to the PCV valve sub-assembly, and slide the clamp to secure it.
17111
2.INSTALL INTAKE MANIFOLD