Home › Engine / Hybrid System › 2AR-FE FUEL › FUEL PRESSURE REGULATOR(w/o Canister Pump Module)
RM3090E _51 Engine / Hybrid System _008397 2AR-FE FUEL _0046888 FUEL PRESSURE REGULATOR(w/o Canister Pump Module) A

2AR-FE FUEL  FUEL PRESSURE REGULATOR(w/o Canister Pump Module)  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:

Do not try to remove the black nylon tube as it is welded to the fuel suction tube assembly.

Click hereEngine / Hybrid System>2AR-FE FUEL>FUEL SYSTEM(w/o Canister Pump Module)>PRECAUTION


PROCEDURE

Hide 1.REMOVE FUEL SUCTION TUBE ASSEMBLY WITH PUMP

Hide 23280J 5.REMOVE FUEL PRESSURE REGULATOR ASSEMBLY

a.
A237616

Using a screwdriver with its tip wrapped in protective tape, remove the fuel pressure regulator assembly.

NOTICE:

Slowly pull out the fuel pressure regulator assembly because the O-ring is firmly installed between the fuel pressure regulator assembly and fuel filter assembly.



b.

Remove the 2 O-rings from the fuel pressure regulator assembly.