Home › Engine / Hybrid System › 2AR-FE ENGINE CONTROL › HEATED OXYGEN SENSOR
RM3090E _51 Engine / Hybrid System _008378 2AR-FE ENGINE CONTROL _0046931 HEATED OXYGEN SENSOR A

2AR-FE ENGINE CONTROL  HEATED OXYGEN SENSOR  REMOVAL  


PROCEDURE

Hide 17401 1.REMOVE FRONT EXHAUST PIPE SUB-ASSEMBLY

Hide 17402 2.REMOVE FRONT NO. 2 EXHAUST PIPE SUB-ASSEMBLY

a.
A293767

Remove the 2 bolts and No. 2 exhaust pipe sub-assembly from the center exhaust pipe assembly.


b.

Remove the gasket from the front No. 2 exhaust pipe sub-assembly.


Hide 89465 3.REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)

a.

Disconnect the heated oxygen sensor connector.


b.
A293400
2.094,1.01 2.552,1.208 false 2.604,1.125 2.906,1.313 0.302,0.188 10 SST

Using SST, remove the heated oxygen sensor from the front No. 2 exhaust pipe sub-assembly.

SST
09224-00010