87246A
1.REMOVE HEATER WATER OUTLET HOSE
Slide the clamp and disconnect the heater water outlet hose from the No. 1 water by-pass pipe.
87245A
2.REMOVE HEATER WATER INLET HOSE
Slide the clamp and disconnect the heater water inlet hose from the cylinder head sub-assembly.
17111
3.REMOVE INTAKE MANIFOLD
Remove the 2 bolts and disconnect the air tube.
Slide the 2 clamps and disconnect the 2 water by-pass hoses from the throttle body and No. 1 water by-pass pipe.
Slide the clamp and disconnect the PCV hose from the intake manifold.
Remove the 5 bolts, 2 nuts, intake manifold and intake manifold stay.
Remove the gasket from the intake manifold.
25719
4.REMOVE VACUUM SURGE TANK
23901
5.REMOVE FUEL TUBE SUB-ASSEMBLY
23807
6.REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY
23250
7.REMOVE FUEL INJECTOR ASSEMBLY
11452
8.REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE
Remove the engine oil level dipstick.
Remove the bolt and engine oil level dipstick guide.
Remove the O-ring from the engine oil level dipstick guide.
17167
9.REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR
17118
10.REMOVE MANIFOLD STAY
17141
11.REMOVE EXHAUST MANIFOLD
16279
12.REMOVE NO. 3 WATER BY-PASS PIPE (for CVT)
Remove the 2 nuts, No. 3 water by-pass pipe and gasket.
11492D
13.REMOVE NO. 1 SEAL PLATE (for Manual Transaxle)
Remove the 2 nuts, No. 1 seal plate and gasket.
12261
14.REMOVE PCV HOSE
Slide the clamp and remove the PCV hose from the PCV valve.
16267
15.DISCONNECT NO. 3 WATER BY-PASS HOSE
Slide the clamp and disconnect the No. 3 water by-pass hose from the water inlet housing.
16261
16.REMOVE WATER BY-PASS HOSE
Slide the clamp and remove the water by-pass hose from the No. 1 water by-pass pipe.
16262
17.REMOVE WATER INLET HOSE
Slide the 2 clamps and remove the water inlet hose from the No. 1 water by-pass pipe and water inlet housing.
16268
18.REMOVE NO. 1 WATER BY-PASS PIPE
Remove the 2 bolts and No. 1 water by-pass pipe.
16321
19.REMOVE WATER INLET
16331A
20.REMOVE THERMOSTAT
19500
21.REMOVE IGNITION COIL ASSEMBLY