Home › Engine / Hybrid System › 3ZR-FE INTAKE / EXHAUST › INTAKE SYSTEM › 2012.12–2015.10
RM3090E _51 Engine / Hybrid System _008408 3ZR-FE INTAKE / EXHAUST _0046964 INTAKE SYSTEM G

3ZR-FE INTAKE / EXHAUST  INTAKE SYSTEM  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT INTAKE SYSTEM

HINT:

Perform "Inspection After Repair" after repairing air leaks in the intake system.

Click hereEngine / Hybrid System>3ZR-FE ENGINE CONTROL>SFI SYSTEM>INITIALIZATION


a.

Check that there is no air suction at the points shown in the illustration.

A293367C01
0.083,0.083 0.396,0.24 0.313,0.156 10 *A
*A for LHD - -


A293366C01
0.073,0.063 0.385,0.219 0.313,0.156 10 *A
*A for RHD - -



Hide 2.INSPECT INTAKE AIR CONTROL VALVE

a.

Connect the GTS to the DLC3.


b.

Start the engine and turn the GTS on.


c.

Warm up the engine.


d.

Enter the following menus: Powertrain / Engine and ECT / Active Test / Activate the VSV for Intake Control.

Powertrain > Engine and ECT > Active Test
Tester Display
Activate the VSV for Intake Control
50004 234 3

e.
A204431

When "ACIS VSV" is turned on, check that the actuator rod operates.

If the operation is not as specified, inspect the intake air control valve and vacuum hose.

Click hereEngine / Hybrid System>3ZR-FE INTAKE / EXHAUST>INTAKE MANIFOLD>INSPECTION


f.

When "ACIS VSV" is turned off, check that the actuator rod returns to its original position.

If the operation is not as specified, inspect the intake air control valve and vacuum hose.

Click hereEngine / Hybrid System>3ZR-FE INTAKE / EXHAUST>INTAKE MANIFOLD>INSPECTION