35106L
1.INSTALL TRANSAXLE OIL PAN SUB-ASSEMBLY
| *1 | Magnet |
Install the 3 magnets to the transaxle oil pan sub-assembly.
Install a new gasket to the transaxle oil pan sub-assembly.
Install the transaxle oil pan sub-assembly to the transaxle with the 19 bolts.
Completely remove any oil or grease from the contact surface of the transaxle case and oil pan sub-assembly with gasket before installation.
35125
2.INSTALL NO. 1 TRANSMISSION OIL FILLER TUBE
Using a 6 mm socket hexagon wrench, install the No. 1 transmission oil filler tube to the transaxle oil pan sub-assembly.
3.ADD CONTINUOUSLY VARIABLE TRANSAXLE FLUID
4.INSPECT FOR OIL LEAK
51444C
5.INSTALL REAR ENGINE UNDER COVER LH
51441
6.INSTALL NO. 1 ENGINE UNDER COVER