Home › Drivetrain › K111 MULTIDRIVE / CVT › PARK / NEUTRAL POSITION SWITCH
RM3090E _52 Drivetrain _008435 K111 MULTIDRIVE / CVT _0047076 PARK / NEUTRAL POSITION SWITCH A

K111 MULTIDRIVE / CVT  PARK / NEUTRAL POSITION SWITCH  REMOVAL  


PROCEDURE

Hide 51441 1.REMOVE NO. 1 ENGINE UNDER COVER

Hide 33820B 2.DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY

a.

Move the shift lever to N.


b.
C202510

Remove the nut and disconnect the transmission control cable assembly from the control shaft lever.


Hide 84540 3.REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY

a.

Disconnect the park/neutral position switch connector.


b.
C168295

Remove the nut, washer and control shaft lever.


c.
C169000C02
2.61,1.283 2.809,1.459 0.199,0.176 10 *1 2.698,1.059 2.698,1.231 false
*1 Lock Plate


Using a screwdriver, bend the tabs of the lock plate.


d.

Remove the lock nut and lock plate.


e.
C169001

Remove the 2 bolts and pull out the park/neutral position switch to remove it.