Home › Engine / Hybrid System › 2AD-FTV INTAKE / EXHAUST › INTERCOOLER
RM3090E _51 Engine / Hybrid System _008383 2AD-FTV INTAKE / EXHAUST _0046769 INTERCOOLER A

2AD-FTV INTAKE / EXHAUST  INTERCOOLER  REMOVAL  


PROCEDURE

Hide 1.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

Hide 2. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 3.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION


Hide 16400 4.REMOVE RADIATOR ASSEMBLY

Hide 16533 5.REMOVE NO. 2 RADIATOR SUPPORT

Hide 25770A 7.REMOVE NO. 2 VACUUM TRANSMITTING HOSE ASSEMBLY

Hide 17362B 8.REMOVE NO. 2 AIR TUBE

Hide 17940D 9.REMOVE INTERCOOLER ASSEMBLY

a.
A291333C01
1.833,3.135 1.833,2.552 true 3,2.49 3,1.906 true 2.927,2.521 3.24,2.677 0.313,0.156 10 *1 1.76,3.156 2.073,3.313 0.313,0.156 10 *2
*1 Radiator Assembly
*2 Intercooler Assembly


Remove the 4 bolts and intercooler assembly from the radiator assembly.


Hide 16535 10.REMOVE CUSHION

a.

Remove the 2 cushions from the lower radiator support.


Hide 16535 11.REMOVE LOWER RADIATOR SUPPORT

a.
A273023C01
0.188,0.292 0.5,0.448 0.313,0.156 10 *A 0.198,2.615 0.51,2.771 0.313,0.156 10 *B
*A for LH Side
*B for RH Side


Remove the 4 bolts and 2 lower radiator supports from the intercooler assembly.