Home › Engine / Hybrid System › 1AD-FTV ENGINE CONTROL › CRANKSHAFT POSITION SENSOR › 2012.12–2015.10
RM3090E _51 Engine / Hybrid System _008729 1AD-FTV ENGINE CONTROL _0048788 CRANKSHAFT POSITION SENSOR A

1AD-FTV ENGINE CONTROL  CRANKSHAFT POSITION SENSOR  REMOVAL  


PROCEDURE

Hide 27020 1.REMOVE GENERATOR ASSEMBLY

Hide 11401G 2.REMOVE CRANKSHAFT POSITION SENSOR

a.

Disconnect the crankshaft position sensor connector.


b.
A273386

Using a clip remover, remove the clip.


c.

Remove the bolt and disconnect the crankshaft position sensor wire harness.


d.

Remove the bolt and crankshaft position sensor.