Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(for Radio and Display Type) › 2012.12–2013.11
RM3090E _56 Audio / Visual / Telematics _008775 AUDIO / VIDEO _0048748 AUDIO AND VISUAL SYSTEM(for Radio and Display Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type)  The Other Caller cannot Hear Your Voice, or Your Voice is too Quiet or Distorted  


CAUTION / NOTICE / HINT

HINT:

If an outlet of the air conditioning system is facing the microphone, noise may be recorded and the other caller may not be able to hear your voice properly.


PROCEDURE

1.CHECK CELLULAR PHONE
a.

Check if the other caller can hear your voice properly.

HINT:

The purpose of this step is to inspect the cellular phone when it is not connected to the vehicle.



Result:
Proceed to
Your voice can be heard properly
Your voice cannot be heard properly



Your voice can be heard properly

2.CHECK AUDIO SETTINGS

Your voice cannot be heard properly

REPLACE CELLULAR PHONE

2.CHECK AUDIO SETTINGS
a.
E225861C02
0.095,0.08 0.251,0.228 0.156,0.148 10 *a
*a Example


Display the "Call" screen.


b.

Check that the "Mute" switch is not set to on.


Result:
Proceed to
"Mute" switch is not set to on
"Mute" switch is set to on



"Mute" switch is not set to on

3.CHECK MICROPHONE AND VOICE RECOGNITION (OPERATION CHECK)

"Mute" switch is set to on

TURN "Mute" SWITCH OFF

3.CHECK MICROPHONE AND VOICE RECOGNITION (OPERATION CHECK)
a.
E225853

Enter the "Microphone&Voice Recognition Check" screen. Refer to Check Mic & Voice Recognition in Operation Check.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM(for Radio and Display Type)>OPERATION CHECK


b.

When voice is input into the microphone, check that the microphone input level meter changes according to the input voice.


Result:
Proceed to
Check result is normal
Check result is not normal



Check result is normal

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

Check result is not normal