Home › Vehicle Interior › METER / GAUGE / DISPLAY › COMBINATION METER
RM3090E _58 Vehicle Interior _008784 METER / GAUGE / DISPLAY _0049183 COMBINATION METER A

METER / GAUGE / DISPLAY  COMBINATION METER  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 83100 1.INSTALL COMBINATION METER ASSEMBLY

a.

Connect the 2 connectors.


b.

Attach the 2 clips to install the combination meter assembly.


c.

Install the 2 screws.


Hide 55411G 2.INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL

Hide 55670 3.INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

Hide 55412C 4.INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL

Hide 5.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION