Home › Vehicle Interior › METER / GAUGE / DISPLAY › CLOCK
RM3090E _58 Vehicle Interior _008784 METER / GAUGE / DISPLAY _0049184 CLOCK A

METER / GAUGE / DISPLAY  CLOCK  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 83950M 1.INSTALL TELLTALE LIGHT ASSEMBLY

a.

Connect the connector.


b.

Attach the claw and 2 clips to install the telltale light assembly.


Hide 55412C 2.INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL

Hide 3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION