Home › Engine / Hybrid System › 2AD-FHV EMISSION CONTROL › EGR COOLER
RM3090E _51 Engine / Hybrid System _008736 2AD-FHV EMISSION CONTROL _0049292 EGR COOLER A

2AD-FHV EMISSION CONTROL  EGR COOLER  REMOVAL  


PROCEDURE

Hide 25051 1.REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY

Hide 16264 2.REMOVE NO. 2 WATER BY-PASS HOSE

A197507

a.

Slide the 2 clamps and remove the No. 2 water by-pass hose from the EGR cooler and turbo oil outlet pipe.


Hide 25601L 3.REMOVE EGR COOLER WITH PIPE ASSEMBLY

a.
A197511

Disconnect the vacuum transmitting hose from the No. 2 EGR valve assembly.


b.
A273032
0.573,1.854 0.885,2.01 0.313,0.156 10 *1
*1 Nut


Remove the 6 bolts, 2 nuts and EGR cooler with pipe assembly.


c.

Remove the gasket from the No. 1 EGR pipe sub-assembly and the gasket from the EGR cooler.


d.
A201869
0.75,0.917 1.25,0.333 1.25,0.333 1.417,0.333 true 1.458,0.229 1.771,0.385 0.313,0.156 10 *1
*1 O-Ring


Remove the O-ring from the EGR cooler.


Hide 25601 4.REMOVE NO. 1 EGR PIPE SUB-ASSEMBLY

a.
A197512
0.625,1.958 0.938,2.115 0.313,0.156 10 *1
*1 Nut


Remove the 2 bolts, 2 nuts and No. 1 EGR pipe sub-assembly.


b.

Remove the gasket from the No. 2 EGR valve assembly.


Hide 25630 5.REMOVE NO. 2 EGR VALVE ASSEMBLY

a.
A201872

Remove the No. 2 EGR valve assembly and gasket from the EGR cooler.