Home › Engine / Hybrid System › 2AD-FHV EMISSION CONTROL › MONOLITHIC CONVERTER
RM3090E _51 Engine / Hybrid System _008736 2AD-FHV EMISSION CONTROL _0049300 MONOLITHIC CONVERTER A

2AD-FHV EMISSION CONTROL  MONOLITHIC CONVERTER  REMOVAL  


PROCEDURE

Hide 25586 2.REMOVE NO. 1 MANIFOLD CONVERTER INSULATOR

a.
A197480

Remove the 5 bolts and No. 1 manifold converter insulator.


Hide 17118 3.REMOVE MANIFOLD STAY

a.
A197483

Remove the bolt, nut and manifold stay.


Hide 17139 4.REMOVE NO. 2 MANIFOLD STAY

a.
A197481

Remove the 3 bolts and No. 2 manifold stay.


Hide 17119 5.REMOVE NO. 2 EXHAUST MANIFOLD STAY

a.
A197482

Remove the 2 bolts, nut and No. 2 exhaust manifold stay.


Hide 25051 6.REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY

a.
A197486

Disconnect the 2 exhaust gas temperature sensor connectors.


b.
A197484

Remove the 3 nuts and exhaust manifold converter sub-assembly.


c.

Remove the gasket from the turbocharger sub-assembly.


Hide 25760A 7.REMOVE VACUUM TRANSMITTING HOSE ASSEMBLY

A206299

a.

Slide the clamp and disconnect the vacuum transmitting hose assembly from the No. 1 vacuum pipe.


Hide 25770A 8.REMOVE NO. 2 VACUUM TRANSMITTING HOSE ASSEMBLY

A206300

a.

Slide the clamp and disconnect the No. 2 vacuum transmitting hose assembly from the No. 2 vacuum pipe.


Hide 89425 9.REMOVE EXHAUST GAS TEMPERATURE SENSOR

Hide 89425A 10.REMOVE NO. 2 EXHAUST GAS TEMPERATURE SENSOR

Hide 25733A 11.REMOVE NO. 1 VACUUM PIPE

a.
A206301

Using a 17 mm union nut wrench, loosen the union nut.


b.

Remove the bolt and No. 1 vacuum pipe.


Hide 25734 12.REMOVE NO. 2 VACUUM PIPE

a.
A206423

Using a 14 mm union nut wrench, loosen the union nut.


b.

Remove the bolt and No. 2 vacuum pipe.


Hide 25587 13.REMOVE NO. 2 MANIFOLD CONVERTER INSULATOR

a.
A197485

Remove the 3 bolts and No. 2 manifold converter insulator.