Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM(for HDD) › 2012.12–2013.11
RM3090E _56 Audio / Visual / Telematics _008776 NAVIGATION / MULTI INFO DISPLAY _0048745 NAVIGATION SYSTEM(for HDD) J

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for HDD)  Route cannot be Calculated  


PROCEDURE

1.CONFIRM SYMPTOMS
a.

Confirm the information about the situation when the route calculation did not complete.

Result:
Result Proceed to
Route cannot be calculated for any destination. A
A road in the route is closed or has not been officially opened yet. B
A ferry crossing is included in the route. B
The destination is too close. B
The route cannot be calculated only when driving on a bumpy road. B


HINT:

A route cannot be calculated if the route is unavailable, a ferry crossing is included in the route, the destination is too close or when driving on bumpy roads.




A

2.CHECK HARD DISC

B

NORMAL OPERATION

2.CHECK HARD DISC

b.

Set another destination and check if the system can calculate the route correctly.


Result:
Proceed to
Route can be correctly calculated
Route cannot be correctly calculated



Route can be correctly calculated

END

Route cannot be correctly calculated

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE