If a malfunction in the engine control system is detected, the operation of VSC and TRC/TRAC is prohibited by the fail-safe function.
When the signals from the engine are input normally, the fail-safe control is canceled and the DTC is not stored.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| C1201 | Engine Control System Malfunction | Engine control system malfunction signal continues for 1 second or more. | Engine control system |
Check if an engine control system DTC is output.
for 1AD-FTV: Click hereEngine / Hybrid System>1AD-FTV ENGINE CONTROL>ECD SYSTEM>DTC CHECK / CLEAR
for 2AD-FHV: Click hereEngine / Hybrid System>2AD-FHV ENGINE CONTROL>ECD SYSTEM>DTC CHECK / CLEAR
for 2AD-FTV (for CCo): Click hereEngine / Hybrid System>2AD-FTV ENGINE CONTROL>ECD SYSTEM(for CCo)>DTC CHECK / CLEAR
for 2AD-FTV (for DPF): Click hereEngine / Hybrid System>2AD-FTV ENGINE CONTROL>ECD SYSTEM(for DPF)>DTC CHECK / CLEAR
| Proceed to |
|---|
| DTC is not output (for 1AD-FTV) |
| DTC is not output (for 2AD-FHV) |
| DTC is not output (for 2AD-FTV) |
| DTC is output (for 1AD-FTV) |
| DTC is output (for 2AD-FHV) |
| DTC is output (for 2AD-FTV (for CCo)) |
| DTC is output (for 2AD-FTV (for DPF)) |
DTC is not output (for 1AD-FTV)
DTC is not output (for 2AD-FHV)
DTC is not output (for 2AD-FTV)
DTC is output (for 1AD-FTV)
DTC is output (for 2AD-FHV)
DTC is output (for 2AD-FTV (for CCo))
Click hereEngine / Hybrid System>2AD-FTV ENGINE CONTROL>ECD SYSTEM(for CCo)>DIAGNOSTIC TROUBLE CODE CHART
DTC is output (for 2AD-FTV (for DPF))
Click hereEngine / Hybrid System>2AD-FTV ENGINE CONTROL>ECD SYSTEM(for DPF)>DIAGNOSTIC TROUBLE CODE CHART