Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1.REMOVE REAR WHEEL
46430
2.DISCONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY
Remove the bolt and disconnect the No. 3 parking brake cable from the rear trailing arm.
48540
3.REMOVE REAR SHOCK ABSORBER ASSEMBLY LH
48710B
4.REMOVE REAR TRAILING ARM ASSEMBLY LH
Loosen the nut of the rear trailing arm.
Remove the 2 bolts from the rear axle carrier.
Remove the 3 bolts and trailing arm from the vehicle.
Remove the bolt, nut and rear suspension arm bracket from the rear trailing arm.