Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › IMMOBILISER SYSTEM(w/ Entry and Start System) › 2012.12–2015.10
RM3090E _58 Vehicle Interior _008690 THEFT DETERRENT / KEYLESS ENTRY _0048164 IMMOBILISER SYSTEM(w/ Entry and Start System) T

THEFT DETERRENT / KEYLESS ENTRY  IMMOBILISER SYSTEM(w/ Entry and Start System)  PROBLEM SYMPTOMS TABLE  


HINT:
·

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

·

Inspect the fuses and relays related to this system before inspecting the suspected areas below.

·

If the problem only occurs in certain locations or at certain times of day, check for wave interference.

·

If vehicle components are added, check for wave interference from the added components.



Immobiliser System
Symptom Suspected Area Link
Security indicator light does not blink Proceed to "Security Indicator Light Does not Blink" Click here
Engine cannot be started*1 Certification ECU (smart key ECU assembly) Click here
ID code box (immobiliser code ECU)*3 Click here
ECM Click here
SFI system*4 Click here
ECD system*5 Click here
Blocking system*6 Click here
Power source mode cannot be changed*1 Engine switch Click here
Certification ECU (smart key ECU assembly) Click here
Steering lock lock/unlock not possible*2 Steering lock ECU (steering lock actuator assembly) Click here

*1: Refer to Problem Symptoms Table for Entry and Start System (for Start Function).

*2: Refer to Problem Symptoms Table for Steering Lock System.

*3: w/ Multi-information Display (Dot Display Type)

*4: for Gasoline

*5: for Diesel

*6: w/ Blocking System