Home › Engine / Hybrid System › STOP AND START › VACUUM SENSOR ASSEMBLY
RM3090E _51 Engine / Hybrid System _009049 STOP AND START _0049619 VACUUM SENSOR ASSEMBLY A

STOP AND START  VACUUM SENSOR ASSEMBLY  REMOVAL  


PROCEDURE

Hide 47028 1.REMOVE BRAKE MASTER CYLINDER SUB-ASSEMBLY (for LHD)

Hide 47028 2.REMOVE BRAKE MASTER CYLINDER SUB-ASSEMBLY (for RHD)

Hide 89420H 3.REMOVE VACUUM SENSOR ASSEMBLY

a.
A273343C01
0.083,0.063 0.396,0.219 0.313,0.156 10 *A 0.115,2.385 0.427,2.542 0.313,0.156 10 *B
*A for LHD
*B for RHD


Disconnect the connector from the vacuum sensor assembly.


b.

Remove the vacuum sensor assembly from the brake booster assembly.


Hide 44696 4.REMOVE VACUUM SENSOR GROMMET

a.

Remove the vacuum sensor grommet from the brake booster assembly.